Solar Panel Bird Control
Solar panel installations are getting more popular by the day.
The shelter provided by the solar panels is also very popular amongst various bird species.
This leads to large amounts of droppings, lice, nesting material, etc. to collect on the site.
The droppings on the solar panels will also reduce the efficiency of the solar panel output.
Eagle Eye Bird Control has various products to prevent this from happening:
Our Bird Skip unit is ideal to physically deter birds from the surface of solar panels.
The units work by means of rotating rods that can either be driven by wind or by a 12v motor.
The reach of each unit is 3.65m and can cover up to 9m².
The Bird Skip is clamped to the solar panel frame, so no drilling is needed.
The Pro-Peller Stealth is an effective daytime deterrent. Approaching birds are discouraged by the menacing pattern of flashes.
The unit is clamped to solar panel frames so no drilling into the panels is required.
Open area bird control
Installing Eagle Eye and Pro-Peller units have proven successful in reducing the infestation of birds around the installation.
Bird wire posts are either glued to the solar panel frame or fastened into existing holes in the panels. This means that no penetration into the panel is needed.
The stainless steel wire running above the frame prevents birds from perching on angled solar panels.
Galvanized mesh closures
Galvanized mesh wire is the ideal solution to birds roosting and nesting under solar panel installations.
The mesh is secured by means of a special “solar panel mesh clip” to avoid drilling into the panel frame
There will be fewer birds perching on top of the solar panels during the day if they cannot roost and nest under the solar panels.
The height of the mesh wire can be adjusted according to the needs of each solar panel installation.